Plug and Play standard
Whether designed for
PCI or ISA bus
architecture
¯
®
¬
: Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Value F6 : Fail-Safe Defaults F7 : Optimized Defaults
3.7.7 DMA-x assigned to
If your ISA card is not PnP compatible and requires a special DMA channel to support its function, set
the selected DMA channel to "Legacy ISA". This setting informs the PnP BIOS to reserve the selected
DMA channel for the installed legacy ISA card.
3.7.8 PCI/VGA Palette Snoop
Enable this option to correct screen color shifts, when there is a combination of VGA cards, accelerator
cards, or MPEG cards present.
3.7.9 Assign IRQ For VGA
The Enabled option allows the BIOS to auto-route an IRQ for use by a VGA card. While most of the
VGA cards do not need the IRQ assignment, certain VGA cards may need it.
3.7.10 Assign IRQ For USB
This item can be found when "OnChip USB" is enabled from Advanced Chipset Features menu. When
this item is Enabled, the system automatically assigns an IRQ for the USB device connected to your
system. However, if you are not using USB devices and an ISA slot required an IRQ address, set this
function to Disabled. The IRQ address previously occupied by the USB device will be available for the
ISA slot.
3.8 PC Health Status
Figure 3.8 PC Health Status
CMOS Setup Utility - Copyright ( C ) 1984 - 2000 Award Software
PC Health Status
Current CPU Temp.
36
°
C/96
°
F
Item Help
Current System Temp.
26
°
C/78
°
F
Menu Level >
Current CPUFAN Speed
4017 RPM
Vcore
2.02 V
Vcmos
2.60 V
Vcc3
3.27 V
Vcc
5.00 V
+12V
11.73 V
¯
®
¬
: Move Enter : Select +/-/PU/PD : Value F10 : Save ESC : Exit F1 : General Help
F5 : Previous Value F6 : Fail-Safe Defaults F7 : Optimized Defaults
3.8.1 Current CPU & System Temperature
(xx°C/xx°F)
The onboard hardware monitor is able to detect the temperatures of motherboard and CPU. These
values refresh upon any key entry.
3.8.2 Current CPUFAN Speed (xxxxRPM)
The onboard hardware monitor is able to detect CPU fan speed in Rotations Per Minute (RPM). These
values refresh upon any key entry in the BIOS setup screen.
3.8.3 Vcore, Vcmos, Vcc3, Vcc & +12V(xx.xxV)
The onboard hardware monitor is able to detect the voltage output by the voltage regulators. These
values refresh upon any key entry.
