Taie FY400, Руководство по эксплуатации, Страница: 64 / 89

63 FY operation manual
13.1 Parameter
Parameter Symbol Content
Range
Default Level
Hide/
Display
MAX MIN
SV_4 Segment 4 SV USPL LSPL 0.0 Level 1 PROG=ON
TM_4 Segment 4 execute time setting 99.59 -1 0.00 Level 1
PROG=ON
OUT4 Segment 4 output limit 100.0 0.0 100.0 Level 1 PROG=ON
SV_5 Segment 5 SV USPL LSPL 0.0 Level 1
PROG=ON
TM_5 Segment 5 execute time setting 99.59 -1 0.00 Level 1
PROG=ON
OUT5 Segment 5 output limit 100.0 0.0 100.0 Level 1
PROG=ON
SV_6 Segment 6 SV USPL LSPL 0.0 Level 1
PROG=ON
TM_6 Segment 6 execute time setting 99.59 -1 0.00 Level 1
PROG=ON
OUT6 Segment 6 output limit 100.0 0.0 100.0 Level 1
PROG=ON
SV_7 Segment 7 SV USPL LSPL 0.0 Level 1 PROG=ON
TM_7 Segment 7 execute time setting 99.59 -1 0.00 Level 1
PROG=ON
OUT7 Segment 7 output limit 100.0 0.0 100.0 Level 1 PROG=ON
SV_8 Segment 8 SV USPL LSPL 0.0 Level 1
PROG=ON
TM_8 Segment 8 execute time setting 99.59 -1 0.00 Level 1
PROG=ON
OUT8 Segment 8 output limit 100.0 0.0 100.0 Level 1
PROG=ON
WAIT
Program execution standby
temperature
0 : when program execute do not
wait for PV temperature
Other values : when PV= (target SV-
WAIT), program entering next
segment
1000 0 0 Level 1 SET5.3
SET8.1
Program execute repeat
0 : disable repeat function
1 : Program execute repeat
1 0 0 Level 4 ---
SET8.2
Program execute power fail
protection
0 : disable power fail protection
1 : enable power fail protection
1 0 0 Level 4 ---
SET8.3
Program execute start address
0 : execute from zero
1 : execute from current PV
1 0 1 Level 4 ---
SET9.2
Program time format
0 : hour.minute
1 : minute.second
1 0 0 Level 4 ---
13.2 Key Operation Description
Functions Keys Description
Run
Eexecuting program, PRO_LED lamp ON, Upper area shows 3 times "RUN"
messages.
Halt
Pause executing program, PRO_LED lamp remains ON, at this moment upper area
will display current temperature value and
“HALT” message alternately.
Jump +
Jump to the next segment, and it can skip segment continuously.
Holding UP key and press SET key 1 time to skip 1 segment, press SET key 2 times
to skip 2 segments, so on and so forth.
Reset +
Stop executing program, PRO_LED lamp OFF, Upper area shows 3 times "REST"
messages.
PV/SV monitor
Press the A / M key for 2 seconds jump to the parameter OUTL, then pressing the
A / M key for 2 seconds return to PV / SV monitor.