TAG MIL-BOOK 200 Series Скачать руководство пользователя страница 114

Страница: 114 / 143

Troubleshooting 8-5

You cannot eject a disc.

The disc is not properly seated in the drive. Manually release the disc
following the method described next:

1. Turn off the system.

2. Insert a small rod, such as a straightened paperclip, into the drive’s

manual eject hole and push firmly to release the tray.

3. Pull the tray out until fully extended, and then remove the disc.

Display Problems

Nothing appears on the screen.

If the power-on indicator is not on, check the electrical outlet, the
plugs and power cords.

If the power button does not respond to a light touch, press the button
firmly.

If you are using battery power, make sure that it has a charge
remaining and that it is installed correctly.

During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.

Eject hole

Содержание MIL-BOOK 200 Series
















































































































































Результаты поиска

Содержание MIL-BOOK 200 Series

Отзывы:

TAG MIL-BOOK 200 Series, Руководство оператора, Страница: 114 / 143

Результаты поиска

Содержание MIL-BOOK 200 Series

Отзывы: