Tadpole 2003 Tadpole, Руководство пользователя

Страница: 15 / 31

Page 15 Tadpole Hot Tub Owner’s Manual — January 24, 2003
(Figure N) Remove JetPak
(Figure M-1) Remove Pillow
(Figure M-2) Remove SnapCap
(Figure M-3) Disconnect Air Line Union
(Figure M-4) Loosen JetPak Unions
JetPaks ™
To identify a type of JetPak, locate the JetPak
Identification Number found on the back side of
the JetPak (example: J03-63-12). This number
provides the following information:
•
The Style of JetPak (J03=Style Number 03)
•
The Water Flow-Rate of the JetPak (63=63
Gallons Per Minute)
•
The Number of Jets (12=12 Jets)
INTERCHANGING JETPAKS:
1. Put the spa in "Standby Mode". This will
prevent the pump from activating while
interchanging JetPaks. (See "Standby Mode"
under "OPERATION" in this Manual.)
2. Remove the headrest pillow (Fig. M-1).
3. Using your hands, remove the SnapCap (top
mounting plate) by lifting it upward (Fig. M-2).
4. Push the JetPak forward until you have
enough room to reach the two PVC water
unions and air line union.
5. Disconnect the air line union (Fig. M-3).
6. After loosening the 2 PVC unions (Fig. M-4),
pull the manifold out from between the two wa-
ter unions and then remove the JetPak from the
JetPod (Fig. N).
7. Exchange the JetPak with another JetPak.
8. Reattach the JetPaks in the same manner as
above.