Tadpole 2003 Tadpole, Руководство пользователя

Страница: 14 / 31

Page 14 Tad Pole Hot Tub Owner’s Manual
Sleep Mode heats the hot tub to within 20°F of
the set temperature only during filter cycles. “ SL ”
will display solid when temperature is not cur-
rent, and will alternate with temperature when
temperature is current.
Preset Filter Cycles
The first filter cycle begins 6 minutes after the
hot tub is energized. The second filter cycle be-
gins 12 hours later. Filter duration is program-
mable at the Master Control Pad for 2, 4, or 6
hours. The default filter time is 4 hours. To pro-
gram, press “Temp”, then “Jets.” Press “Temp” to
adjust. Press “Jets” to exit programming.
The low speed of pump 1 runs during filtration
and the ozone sterilizer (if installed) will be en-
abled. If any button is pressed during filtering,
the ozone sterilizer (if installed) will be disabled
for 60 minutes.
Temperature Display Inversion
Press the “Temp” button, then the “Jets” button
to invert display. Use the same sequence to re-
vert back to normal display.
Standby Mode
The hot tub can be disabled when the filter
needs to be serviced or when changing/servicing
a JetPak™. Press the “Temp” button, then the
“Light” button, and the display will show “
SY .” All
hot tub functions will be disabled except for
auxiliary freeze control. Press any panel button
to resume hot tub operation.
Freeze Protection
If the temperature sensors detect a drop to 40°F
within the heater, then pump 1 (and the heater if
necessary) will automatically activate to provide
freeze protection. The equipment stays on until
the sensors detect that the hot tub temperature
has risen to within 15°F of the set temperature.