MICO-PS-3P
22
Manual Setup
Manual Setup is a configuration program designed for more experienced users of NetWare.
To setup the print server by using Manual Setup follow the steps:
1. Run PCONSOLE in NetWare 3.x or NetWare 4.x and create the necessary parameters
(Refer to your Novell NetWare print server/Services manual for details).
2. Log into your NetWare file server as a Supervisor (Admin.) or equivalent. From your
Windows 95/98/Me, run PSAdmin.
3. Select the print server that you wish to configure.
4. Click
Properties
in the tool bar and the following screen will appear,
Properties
button
just like a picture
, as follow picture.
5. Select
NetWare
and type in the Print server that created during PCONSOLE.
6.
(Optional)
In
Bindery Settings
, Select NetWare file server(s) that print server can do
Bindery mode.
7.
(Optional)
In
NDS Settings
, Select NetWare file server(s), NetWare 4.x or later that print
server can do NDS mode.
8. Click
OK
. From your NetWare client computer, such as Windows 95/98/Me, create a
printer that is connected (redirected) to one of the NetWare print queues serviced by the
print server.
MICO-PS-3P
23
Properties –TCP/IP Options
The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is
detailed as follows.
Obtain an IP address from a DHCP server:
This option enables or disables the DHCP feature of the print server. When this option is
enabled, the print server will obtain an IP address automatically from the DHCP server on
your LAN.
The default value is
“
Disable
”.
Note
: 1. Once this option is enabled, the following IP address, Subnet Mask, Gateway will be
grayed out and are not available for editing.
2. While the print server supports DHCP, we strongly recommend you manually
specify a
fixed
IP address to the print server.
Specify an IP address:
IP Address:
This option shows the print server’s current IP address maybe obtained from
your DHCP server or manually specified. This option also allows you to
manually specify an IP address to the print server, if DHCP option is disabled.
Subnet Mask:
This option shows the print server’s current subnet mask maybe obtained
from the DHCP server or manually specified. This option also lets you
manually specify a subnet mask to the print server, if DHCP option is
disabled.
This value is optional
.
Gateway
: This option shows the print server’s current gateway address maybe obtained
from the DHCP server or manually specified. The option also allows you to
manually specify the IP address of the gateway to the print server, if DHCP option
is disabled.
This value is optional
