TA FRISTAR3, Руководство по эксплуатации

Страница: 9 / 28

9
Interchanging connections
For optimum matching of the pipelines to the freshwater station it is possible to interchange the con -
nections (right/left). This does not change venting of the primary circuit, however.
Procedure:
1. Demounting of pipe elements 1 - 4 including pump from the heat exchanger
2. Removal of the pump and installation in the correct position.
3. Remount pump connection plug 5 on the other side. The flow direction of the pump is upwards.
On WILO pumps, the connection plug is above the pump, and on Grundfos pumps it is below.
4. Mounting of pipe elements 1 - 4 and the pump on the heat exchanger (see figures above) on the
other side, correct positional setup of the volume flow sensor
5. Commissioning according to the "Commissioning" chapter
Important: The primary and secondary connections must be exchanged together!
1
1
2
2
3
4
5
3
4
Pump connection-plug
Version
„Pump right“
Version
„Pump left“