TA FRISTAR3 Скачать руководство пользователя страница 26

Страница: 26 / 28

EU Declaration of conformity

Document-No. / Date:

TA21001 / 19/02/2021

Company / Manufacturer:

Technische Alternative RT GmbH

Address:

A-3872 Amaliendorf, Langestraße 124

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Product name:

FRISTAR3 / FRISTAR3-WP

Product brand:

Technische Alternative RT GmbH

Product description:

Fresh water station

The object of the declaration described above is in conformity with Directives:

2014/35/EU

Low voltage standard

2014/30/EU (11/09/2018) Electromagnetic compatibility
2011/65/EU (01/10/2022) RoHS Restriction of the use of certain hazardous substances
2009/125/EU (04/12/2012) Eco-design directive

Employed standards:

For Grundfos pump:

EN 60335-1:2012/AC:2014, EN 60335-2-51:2003/A1:2008/A2:2012, EN 55014- 1:2006/

A1:2009, EN 55014-2:1997/A1:2001/A2:2008, EN 16297-1:2012, EN 16297-2:2012, EN 16297- 3:2012

Position of CE - label:

On packaging, manual and type label

Issuer:

Technische Alternative RT GmbH
A-3872 Amaliendorf, Langestraße 124

This declaration is submitted by

Dipl.-Ing. Andreas Schneider, General manager,
19/02/2021

This declaration certifies the agreement with the named standards, contains however no warranty of character

istics.

The security advices of included product documents are to be considered.

EN 60730-1: 2011

Automatic electrical controls for household and similar use –

Part 1: General requirements

EN 61000-6-3: 2007

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission

standard for residential, commercial and light-industrial environments

+A1: 2011

+ AC2012

EN 61000-6-2: 2005

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for

industrial environments

+ AC2005

EN 50581: 2012

Technical documentation for the assessment of electrical and electronic

products with respect to the restriction of hazardous substances

Содержание FRISTAR3





























Результаты поиска

Содержание FRISTAR3

Отзывы:

Похожие инструкции для FRISTAR3

Бренды по названию

Популярные бренды

TA FRISTAR3, Руководство по эксплуатации

Результаты поиска

Содержание FRISTAR3

Отзывы:

Похожие инструкции для FRISTAR3

Бренды по названию

Популярные бренды