manualshive.com logo in svg

Systran SCRAMNet+ VME3U, Справочник по аппаратуре

Поделиться
Скачать
Systran SCRAMNet+ VME3U Скачать руководство пользователя страница 20

DESCRIPTION 

Copyright 1995, S

YS

I

RAN

 Corp. 

3-6 VME3U 

H/W 

REFERENCE 

3.6.1 Network Interrupt WRITEs 

FOREIGN MESSAGE 

The node can receive a message from another node with the interrupt bit set. If Receive 
Interrupt Enable (ACR, bit 0) and Interrupt Mask Match Enable (CSR0, bit 5) are 
enabled, the data is written to shared memory and the address is placed on the Interrupt 
FIFO.  

NATIVE MESSAGE 

If the message received was originated by the node, and Write Own Slot Enable (CSR2, 
bit 9) and Enable Interrupt on Own Slot (CSR2, bit 10) are enabled, the host has 
authorized a Self-Interrupt. The data is written to shared memory and the address is 
placed on the Interrupt FIFO. 

Network Interrupt WRITEs can be accomplished by two methods:  

Selected. Data WRITEs to selected shared memory locations from the network.  
Forced. Any data WRITEs to any shared memory from the network.  
In either case, the node can be configured to WRITE to itself. This condition is called  
“Self Interrupt” . 

3.6.2 Selected 

The “selected” method requires choosing SCRAMNet

+

 shared-memory locations on 

each node to receive and/or to transmit interrupts. These shared-memory locations may 
also be used to generate signals to external triggers. The procedure for selecting shared-
memory locations for interrupts and/or external triggers is explained in the paragraph on 
the Auxiliary Control RAM, paragraph 3.5.   

OUTGOING INTERRUPT 

The Outgoing Interrupt is described in Figure 3-3. If both Transmit Interrupt Enable 
(ACR, bit 1) and Network Interrupt Enable (CSR0, bit 8) are set, and a data item is 
transmitted to any of the selected-interrupt memory locations, then an interrupt message 
is sent out on the network. This message will generate interrupts to any processors on the 
network that have that same shared-memory location selected to receive interrupts.  

INCOMING INTERRUPT 

Figure 3-4 demonstrates the process of receiving a message with the interrupt bit set. The 
data is written to shared memory and the address is placed in CSR5 and CSR4 to await 
being sent to the host. If the Receive Interrupt Enable (ACR, bit 0), Host Interrupt Enable 
(CSR0, bit 3), and the Interrupt Memory Mask Match Enable (CSR, bit 5) are set, and 
network interrupt data is received for any one of the selected interrupt memory locations 
the following occurs: 

the data is stored in that location 
the SCRAMNet

+

 address of the memory location is placed on the Interrupt FIFO queue, 

and  
an interrupt is sent to the processor. 
 

Содержание SCRAMNet+ VME3U







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды