SystemAir fantech Pro 100 Series, Руководство по установке

Страница: 8 / 20

8
fantech
Maintenance
For quiet and efficient operation, long life, and attractive appearance - lower or remove grille and vacuum interior of unit with the dust
brush attachment.
The motor is permanently lubricated and never needs oiling. If the motor bearings are making excessive or unusual noises, replace
the motor with the exact service motor. The impeller should also be replaced.
Keep all electrical components away from water. Do not use corrosive chemicals or water in excess of 60C (140°F) to clean plastic
parts.
Wiring diagram
FAN
L1: light (Red)
L1: Mtr (Black)
N: Light & Mtr (White)
: Ground (Green)
2
Run 120 Vac house wiring to the location of the fan. Use only UL-approved connectors (not included) to attach the field wiring to the wiring plate. Refer
to the wiring diagram, and connect the wires as shown.
Install the Grille
To attach the grille assembly to the fan housing, pinch the grille springs on the sides of
the grille assembly, and position the grille into the housing with the grille springs in the
appropriate slots. Push the grille assembly towards the ceiling to secure.