Arming Schedule and Alarm Linkage
© 2022 System Q Ltd
36
Before You Start
Set the DNS server before using the Email function. Go to
Configuration
Network
Basic
Settings
TCP/IP
for DNS settings.
Steps
1. Go to email settings page:
Configuration
Network
Advanced Settings
.
2. Set email parameters.
1) Input the sender's email information, including the
Sender's Address
,
SMTP Server
,
and
SMTP Port
.
2) Optional: If your email server requires authentication, check
Authentication
and input
your user name and password to log in to the server.
3) Set the
E-mail Encryption
.
When you select
SSL
or
TLS
, and disable STARTTLS, emails are sent after
encrypted by SSL
or TLS. The SMTP port should be set as 465.
When you select
SSL
or
TLS
and
Enable STARTTLS
, emails are sent after
encrypted by
STARTTLS, and the SMTP port should be set as 25.
Note
If you want to use STARTTLS, make sure that the protocol is supported by your
email server. If you check the
Enable STARTTLS
while the protocol is not
supported by your email sever, your email is sent with no encryption.
4) Optional: If you want to receive notification with alarm pictures, check
Attached
Image
. The notification email has 3 attached alarm pictures about the event with
configurable image capturing interval.
5) Input the receiver's information, including the receiver's name and address.
6) Click
Test
to see if the function is well configured.
3. Click
Save
.
9.1.4 Notify Surveillance Center
Check
Notify Surveillance Center
, the alarm information is uploaded to the surveillance
center when an alarm event is detected.
