4/4/2022
SEEK200
13
Pupil Distance: The pupil distance refers to the square size composed by the area
between two pupils, and it is the basic standard for a camera to identify a target. You
can enter the pupil distance value or draw pupil distance areas in live view.
Generation Speed: It refers to the target generation speed. The higher the value
is, the easier the target can be detected.
Sensitivity: It refers to face detection sensitivity.
Alarm When Temperature is Above: It refers to the temperature alarm threshold.
When the target temperature is higher than the setting value, the device outputs alarm.
Pre-Alarm Temperature: When the face temperature is higher than the set value,
the device outputs pre-alarm and upload captured face image.
9. Click
Draw Area
, and draw a face detection area in live view. You can move the
rectangle or drag the corners of rectangle to adjust the position and size.
Note
You should draw the detection area within the red rectangle.
10. Click
Save
.
11. Set the arming schedule and linkage methods. For the information about arming
. For the information about linkage
methods, see
.
6.2.2 Measure Body Temperature in Thermal Channel
Steps
:
1. Go to
Configuration
Temperature Screening
Temperature Screening
Configuration
2. Select thermal channel (Camera 02).
32
33
