System Equine TRC-6, Руководство по сборке

Страница: 7 / 8

STEP 9
(Optional Pull-behind Model Only)
ASSEMBLY AND MOUNTING OF WHEEL ASSEMBLY
See STEP 9 photo before proceeding
The final step is to assemble and mount the wheel assembly. Mount the
wheels on the axles with grease nipples to the outside and tighten the
nuts.
NOTE: Remember to grease the wheels periodically. Next attach the wheel
assembly to the mounting bracket that is welded to the end of the
A-frame with the two 1/2” x 1 1/2” bolts and lock nuts.
NOTE: The wheel assembly is used to raise the blade off the ground to
prevent damage to the blade when traveling to and from your track
or ring or anytime you are travelling over rough ground.
NOTE: If using the wheel kit on an existing Track & Ring Conditioner posi-
tion and clamp the wheel assembly securely in place and drill a 1/2”
hole through the mounting bracket hole and A-frame at 3” from the
back of the A-frame.
OPTIONAL PULL-BEHIND ATTACHMENT ASSEMBLY (CONTINUED)
Swivel crank handle
Tubeless
Rubber Tires
STEP 9
Wheel assembly
Blade height adjustment handle
Tubeless tire
PULL-BEHIND WHEEL ASSEMBLY