Systec & Solutions PILOT 219, Инструкция по эксплуатации

Страница: 36 / 43

1.
Clean the device (see
Ä
Chapter 5.4 “Cleaning the device”
on page 28 ).
1512
222
734,82
222
1160
Fig. 23: Screw connections on the equipment rack adapter
2. Release the screw connections on the equipment rack adapter.
3. Lift the device off the equipment rack adapter and hold it firmly.
ð
You can now see the interface plate on the rear of the device.
Fig. 24: Interface plate on the rear of the PILOT 219 PC (depending on the
configuration)
4. Release the screws on the mains plug.
5. Disconnect the device from the power supply.
6. Disconnect all the cables from the interface plate.
ð
The device is now unmounted.
Storage
Unmounting the device
PILOT 219 PC - Industrial PC 36