Systec & Solutions PILOT 219, Инструкция по эксплуатации

Страница: 28 / 43

5.3 Operating the touchscreen
With PCT (projected capacitive) multi-touch there is no need
to install a driver.
Install the installation files on the supplied USB stick.
If the stick is not available: Send an e
‑
mail to
support@systec-hardware.com .
When Projected Capacitive Touch:
1.
Launch Tablet PC Settings in Windows’ Control Panel.
ð
A new window opens up.
2.
Choose the Calibration option.
3.
Further instructions follow.
ð
The touchscreen is correctly calibrated.
When resistive Touch:
1.
Install the installation files on the supplied USB stick.
2. Calibrate touchscreen within the installed software.
ð
The touchscreen is correctly calibrated.
If the stick is not available: Send an e
‑
mail to
support@systec-hardware.com .
5.4 Cleaning the device
To prevent malfunctions or incorrect data entry due to inadvertent
operations: Switch the device off before cleaning it (see Ä Chapter 5.2
“Switching the device off” on page 27 ).
Installing the driver
Windows 7 and higher
Calibrating the touchscreen
Windows 7
Operation
Cleaning the device
PILOT 219 PC - Industrial PC 28