40
12
The [Synchronization] dialog
opens.
Confirm that there is a check in
the box for the data you wish to
transfer. (In the example screen
on the right, there is one data
item [NX1P2] to transfer).
Since you want to transfer the
EtherNet/IP connection settings,
make sure that the box for “Do
not transfer EtherNet/IP
connection settings (built-in port
and Unit) is unchecked.
Click the [Transfer to Controller]
Button.
*
Executing [Transfer to
Controller] transfers the data
of Sysmac Studio to the
controller and checks that the
data was received.
13
Confirm that the dialog settings
are as shown in the figure on the
right and press the [Yes] button.
The “Synchronizing” dialog
appears.
Another Confirmation dialog
appears when synchronization
completes. Confirm there are no
problems and click the [No]
button.
*
Do not return to “Run Mode”
yet.
