24
1
Connect a LAN cable to Built-in
EtherNet/IP Port (PORT1) of the
controller and connect a PC and
a switching hub to the controller
as shown in "5.2. Device
configuration".
2
Start Sysmac Studio.
*
If the User Account Control
Dialog Box is displayed at
startup, select the option to
start.
3
Sysmac Studio starts.
Click [New Project].
4
The Project Properties Screen is
displayed.
*
In this document, "New
Project" is used as the project
name.
Select the device to use from
the pull-down list of Device.
Select an applicable version
from the "Version" pull-down list.
*
Although 1.16 is selected as
an example in this document,
select the version you actually
use.
Controller
End Cover
LAN cable
Switching hub
Partner Device
PC/