syslogic TFT/PB101PU Series, Пользовательская документация

Страница: 12 / 35

PROTOUCH-WIDE MONITOR: user documentation - PRELIMINARY
DOC/PROTOUCH-WIDE_MONITOR; V0.2
DOC_PROTOUCH-WIDE_MONITOR_V0.3.docx Seite 12 von 35
© 2019 Syslogic Datentechnik AG | All rights reserved
2.4.2 Power supply
The A/D board and its peripherals are powered by a non-isolated, integrated power supply which generates all the necessary voltages.
Device Connection
Weidmueller BCZ 3.81/03/180F SN BK (Ordercode 1792960000)
Power Supply requirements:
•
The power supply used must fulfil CE and safety normative according to the application.
•
Always use a short circuit protected power supply.
•
Do not use power supplies wires or cables longer than 3m.
Pin Signal Marking Remarks
1 NC
2 +24VDC VDC
3 GND GND GND (/shield)
Tab. 3 Power supply connector (1x3 pin)
2.4.3 VGA
Input socket for VGA signals
Device Connection
The VGA interface uses the standard VGA connector Mini DSUB 15pin
Pin Number Symbol Signal
1 RED Analog Red
2 GREEN Analog Green
3 BLUE Analog Blue
4 GND No connection
5 GND Digital GND
6 RGND Red Return
7 GGND Green Return
8 BGND Blue Return
9 NC +5V DC
10 SGND Sync GND
11 NC No connection
12 SDA DDC Serial Data
13 HSYNC Horizontal Sync
14 VSYNC Vertical Sync
15 SCL DDC Data Clock
Important Note
Maximum cable length allowed for display connection is 3 m. If longer cables are used, special
overvoltage and filtering elements must be installed to comply with the requirements of EMI/RFI
CE
-certification. Only use high quality industrial devices with sufficient EMI compatibility.