Min. : Set the min size of object while object entered.
Max. : Set the max size of object while object entered.
Enter : Set the entering into the Area.
Exit : Set the exiting out of the Area.
Base : Set the reference point while object entered.
It occurs a event when reference point enters in a specified enter box.
Top : Reference point is the top of object.
Bottom : Reference point is the bottom of object.
Both : Reference point is the top of object and bottom of object.
Count : Set the counting of crossing object.
Set Point : Set the enter box.
Clear : Remove the enter box.
Follow steps below to set the Enter:
1. Set the min size of the enter object and set the max size.
2. Select the enter base.
3. Select the “Set Point” for enter box.
4. Select the Exit (with saving) and push the Joystick to the right. Press ESC to exit the program
without saving.
3.5.6 Absent
This can detect an object abandoned or removed in a specified area.
You can see current status of moving object by “Bounding Box”.
Once moving object is fixed as “Abandon” or as “Removal”, color of “Bounding box” will be
changed to complementary color of ROI line.
(“Bounding box” means you can see a virtual rectangle on moving object. In prior of this, you
make sure that you set “On” in display and Bounding box in OSD Setup.
Min.
: Set the min size of object while object abandoned.
Max.
: Set the max size of object while object abandoned.
27
