Example
:
2 + PRST and do step 1 to 7. In step 8, just press the
Ctrl key at the start angle
position, the current position will be displayed as a start position.
b. Save and exit from the menu.
c. In normal mode, call a preset to be the end point of scan. Press 3 + PRST then press Scan
key to enter the Auto Scan menu. Move the cursor position to END ANGLE. Just press CTRL
key at the end angle position. Save and exit from the menu.
The setting procedure is the same as above.
Note : 09: AUTO-PAN mode (Endless panning)
16
