manualshive.com logo in svg

Syqwest HydroBox, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Syqwest HydroBox Скачать руководство пользователя страница 42

HYDROBOX 

™

 

Operations And Maintenance Manual 

 

3.3.2

 

– The View Menu  

 

OPERATION 3-12 

©

2006 SyQwest Incorporated 

Toolbar 

Selecting this will toggle the toolbar on and off.  (Refer to 
Section 3.1.1 for more information on toolbar). 
 

Status Bar 

Selecting this will toggle the Status Bar on and off.  The Status 
bar is located at the bottom of the HydroBox application and 
displays extended information about a particular button or 
function. 

 
AScope Trace 

Toggle AScope Trace to change the style of the amplitude along 
the right hand side of the data collection screen. 

 
Enable GUI Zoom 

This option allows the user to digitally scale bottom data from a 

playback file and can function as a manual zoom.  This feature was included in order to provide a method 
to zoom in on bottom data previously recorded without one of the HydroBox Sensor’s enhanced zoom 
modes enabled.  When enabled, two zoom bars will appear on the scalebar of the Normal Data window.  
These bars can be dragged up or down in order to set the GUI zoom range.  Data displayed in GUI Zoom 
is derived from recorded Normal data. 

Hi Freq Only 

This selection displays the Hi frequency channel data only. When selected, this mode will use the entire 
viewing area. 

Lo Freq Only 

This selection displays the Lo frequency channel data only. When selected, this mode will use the entire 
viewing area 

Dual Channel 

This selection displays both Hi and Lo frequency data. The Lo frequency data will be located in the left 
part of the viewing screen, and the Hi frequency data will be located to the right. 

Enable GUI Zoom 

 

This option allows the user to digitally scale bottom data from a playback file and can function as 

a manual zoom.  This feature was included in order to provide a method to zoom in on bottom data 
previously recorded without one of the HydroBox Sensor’s enhanced zoom modes enabled.  When 
enabled, two zoom bars will appear on the scalebar of the Normal Data window.  These bars can be 
dragged up or down in order to set the GUI zoom range.  Data displayed in GUI Zoom is derived from 
recorded Normal data. 

Hi Freq Only 

This selection displays the Hi frequency channel data only. When selected, this mode will use the entire 
viewing area. 

 

Lo Freq Only 

This selection displays the Lo frequency channel data only. When selected, this mode will use the entire 
viewing area 

Содержание HydroBox























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды