Syqwest HydroBox, Инструкция по установке, эксплуатации и обслуживанию

Страница: 39 / 54

HYDROBOX
™
Operations and Maintenance Manual
NOTE: External Eventing requires an additional free COM Port. If there are no more
available COM Ports on your PC, contact SYQWEST for an expansion card.
NOTE: Periodic Eventing is not available when External Eventing has been enabled.
NOTE: All event marks and text annotation shown on the screen are inserted BETWEEN
the acquired bottom data so that there is no loss of information.
3.3.1.5 Configure Thermal Printer
OPERATION 3-9
©
2006 SyQwest Incorporated
This menu allows you to configure a thermal printer for
use with the HydroBox software. It supports 3 different
models from the Raytheon/SYQWEST TDU series,
including the TDU-850, TDU-1200, and the TDU-2000,
all TDU models are available from SyQwest Inc.
In addition to Enabling or Disabling the printer, there are
a number of other options available to the user. These
settings only affect the thermal printout, not the on-screen
display. They include:
•
Display Negative Image
- Enabling this option will invert the gray scale colors on
the thermal printout.
•
Flip Rasters Left to Right or Top to Bottom
- Enabling this option will print a mirror image of the
event/annotation marks. This option is to be used in conjunction with the L/R dip
switch located on the back of the TDU Printer (Refer to your TDU Manual for more
information). By default, the switch is set to the L position and so this option should
not be enabled. However, if the dip switch is set to R, enable this option to print the
event/annotation marks correctly.
•
Print Grid Lines and Range Markers
- Enabling this option will print the data along with 4 grid lines and periodic range
markers.
•
Print Annotation Text Transparently
- By default, this option is not enabled and annotation is printed with a solid background
so that the text is always readable. This will cause some bottom data not to be shown
on the printout, but will still be present on the display and recording file (if recording is
on). Enabling this option will print annotation text without a solid background. This
may make annotation text hard to read when printed over bottom data.
•
Repeat Raster Count
- A Repeat Raster Count can be entered between 1 and 10. The default count is 1 Raster.
Increasing this value will cause the printout to be stretched horizontally. This option is
useful when using a TDU-1200 or TDU-2000 printer which has a finer vertical
resolution. (i.e. Pixels are small)