Synway Information Engineering Co., Ltd
SMG-C Series Analog Gateway User Manual (Version 1.7.1)
Page 63
Figure 3-60 FXO Port Timing Setting Interface
The table below explains the configuration items shown in the above figure:
Item
Description
Port
Serial number of the FXO port on the device.
Unit
Sets the timing unit for the call. The actual call time will be calculated as the integral
multiple of the setting time. Take an example: supposed the setting time is 30s and
the actual call time is 72s, thus, the gateway will consider the call time as 90s.
Time Limit on a
Single Call
Sets whether to enable the time limit on a single call.
Max Call Time
Sets the maximum time length of a call.
Time Limit on Total
Calls
Sets whether to enable the time limit on all calls at the port.
Timing Cycle
Sets the time count cycle for the port.
Clear
Sets the time node to clear the time count.
Set Spent Call Time
Sets the spent call time length of the port.
SIP Code Reply
Once the spent call time reaches the total time limit, the FXO port will not be able to
make outgoing calls and the gateway will reply the designated SIP code to the IP
side.
Apply to Other Ports
Sets whether to apply above settings to other ports or port groups.
Click
Modify
to save the settings into the gateway, click
Return
to cancel the settings.