Synway SMG-C Series Скачать руководство пользователя страница 33

Страница: 33 / 111

Synway Information Engineering Co., Ltd

SMG-C Series Analog Gateway User Manual (Version 1.7.1)

Page 28

Address

feature is enabled.

STUN Server

Sets whether to enable the STUN server for NAT traversal. By default the STUN

server is disabled.

NAT Type

Detected NAT (Network Address Translation) type. The gateway will return the NAT

type automatically in case

STUN Server

is enabled. It includes 9 types: unknown;

no NAT; ConeNat; RestrictedNat; PortRestrictedNat; Symmetric NAT; Symmetric

NAT with firewall; can’t detect over (fail to send detect message) and fail to detect

(No reply from the stun server).

STUN Server

Address

Address of the server for STUN traversal.

Mapping Contact IP

The IP filled in here will be used in the Contact field of the SIP message.

Mapping SDP IP

The IP filled in here will be used in the SDP field of the SIP message.

Rport

When this feature is enabled, a corresponding Rport field will be added to the Via

message of SIP. The default value is

enabled

Auto Detect NAT IP

When this feature is enabled, the gateway will parse the corresponding address and

port in the message returned by Rport so as to use them for the following

communication. By default, this feature is

disabled

Note:

This feature gets valid only when Rport is enabled.

RTP Self-adaption

When this feature is enabled, the RTP reception address or port carried by the

signaling message from the remote end, if not consistent with the actual state, will

be updated to the actual RTP reception address or port. By default, this feature is

disabled

Содержание SMG-C Series
















































































































Результаты поиска

Содержание SMG-C Series

Отзывы:

Synway SMG-C Series, Руководство пользователя, Страница: 33 / 111

Результаты поиска

Содержание SMG-C Series

Отзывы: