Synway SMG-C Series, Руководство пользователя, Страница: 46 / 111

Synway Information Engineering Co., Ltd
SMG-C Series Analog Gateway User Manual (Version 1.7.1) Page 41
CallerID
The gateway will match the CallerID set in this item to that of the incoming call. If
they are matched, the current ringing scheme will be executed; otherwise, the
default ringing scheme (1 sec on and 4 sec off) will work.
The rule to fill in the CallerID is the same as that of 3.5.9 Dialing Rule . Multiple
CallerIDs are supported; they should be separated by “,”
Alert-Info Value
The gateway will match the alert-info value set in this item to that of the incoming
call. If they are matched, the current ringing scheme will be executed; otherwise,
the default ringing scheme (1 sec on and 4 sec off) will work..
Ringing Scheme
The ringing scheme can be “1,X,Y” or “2,X,Y,M,N”, in which, the number 1 or 2
denotes one group or two groups; X, M denote the duration at on state while Y, N
denote the duration at off state.
Note: The duration at ON or OFF cannot be greater than 12000ms, the total
duration at ON and OFF cannot be greater than 16000ms, and N - the last duration
at OFF cannot be less than 1800ms if the item “Occasion to Send FSK CallerID” is
set to After the first ring.
After configuration, click Save to save the above settings into the gateway or click Reset to
restore the configurations.
3.5.7 Fax
Figure 3-35 Fax Configuration Interface (Disable by default)
See Figure 3-35 for the default fax mode configuration. The table below explains the items shown
in the above figure.
Item Description
Fax Mode
The real-time IP fax mode. The optional values are T.38 , Pass-through and Disable ,
and the default value is Disable which means to disable both T.38 and
Pass-through.
See Figure 3-36 for the fax configuration under the T.38 mode.