Synway SMG-C Series Скачать руководство пользователя страница 60

Страница: 60 / 111

Synway Information Engineering Co., Ltd

SMG-C Series Analog Gateway User Manual (Version 1.7.1)

Page 55

Register Port

Sets whether to register the port to the SIP server.

When this item is set to

, the item

Reg Status

on the FXS settings interface

(Figure 3-53) shows

Unregistered

; when this item is set to

Yes

, the item

Reg Status

shows

Failed

Registered

SIP Account

When the port initiates a call to SIP, this item corresponds to the username of SIP.

The default SIP account is 80XX among which XX represents the corresponding

port number. For example, the default SIP account corresponding to Port 1 is 8001,

and that corresponding to Port 8 is 8008.

Display Name

Set the content of the displayname field of the SIP message. If it doesn’t set with

any value, the displayname field will by default display the content of callerid.

Password

Registration password of the port. To register a port to the SIP server, both items

SIP Account

and

Password

must be filled in.

Authentication

Username

Authentication username of a port, used to register the port to the SIP server when

IMS network is enabled.

Note: This item appears only when IMS Network or Multi-Registrar Server is

enabled.

Display Name

Preferred

In case this feature is enabled and the port group or the whole gateway is

registered, if the display name set by the port are different from that set by the port

group, the displayname in the sent SIP message will be the one set by the port. In

case this feature is disabled, if the port group is registered, the displayname in the

sent SIP message will be the display name set by the port group; if the whole

gateway is registered, the displayname in the sent SIP message will be the

displayname of the gateway.

Server Index

The index of the SIP server which will be quoted by the current FXS port.

Auto Dial Number,

Wait Time before

Auto Dial

The FXS port will dial the

Auto Dial Number

if there is no dialing operation after

pickup within a designated time period (i.e.

Wait Time before Auto Dial

Input Gain, Output

Gain

Adjusts the gain of the voice input to/ output from the FXS port. Range of value:

-24~12, calculated by dB, with the default value of 0.

Echo Canceller

The echo cancellation feature for a call conversation over the FXS channel. By

default, this feature is enabled and the effect can reach 128ms.

Forbid Outgoing

Call

If this feature is enabled, the FXS port will be forbidden to call out. The default

setting is

disabled

CID

CallerID. If this feature is enabled, the FXS port will send the CallerID of the

incoming IP call together with the ringing tone to the corresponding station. The

default setting is

enabled

. CallerID displays digits only and will filter out any other

characters if exist.

Call Waiting

If this feature is enabled, the FXS port in conversation can accept another call from

IP and keep it in the waiting state. Once the current conversation is finished and the

station hangs up, the call in the waiting state will ring the station and wait for

answer. The default setting is

disabled

DND

Do Not Disturb. If this feature is enabled, the FXS port will reply the 403 message to

reject all incoming calls. The default setting is

disabled

Содержание SMG-C Series
















































































































Результаты поиска

Содержание SMG-C Series

Отзывы:

Synway SMG-C Series, Руководство пользователя, Страница: 60 / 111

Результаты поиска

Содержание SMG-C Series

Отзывы: