Synway SMG-C Series Скачать руководство пользователя страница 38

Страница: 38 / 111

Synway Information Engineering Co., Ltd

SMG-C Series Analog Gateway User Manual (Version 1.7.1)

Page 33

Minimum Time

Time length for judging a flash operation. Only a hook-flash operation which lasts a

time more than the value of this configuration item will be regarded as a valid flash

operation. Range of value: 80~

Maximum Time

, calculated by ms, with the default

value of 80.

Maximum Time

Time length for judging a flash operation. Only a hook-flash operation which lasts a

time less than the value of this configuration item will be regarded as a valid flash

operation. Those lasting a time longer than the value of this configuration item will

be regarded as hangup operations. Range of value: 32~2000, calculated by ms,

with the default value of 700.

Minimum Time

Length of On-hook

Detection

The minimum time length for detecting whether the phone is on-hook or not. Range

of value: 64~2000, calculated by ms, with the default value of 64.

Note:

This item is valid only when the item Hook-flash Detection is disabled.

CID Transmit Mode

The mode adopted by the FXS port to send the CallerID. The optional values are

FSK

and

DTMF

, with the default value of

FSK

Occasion to Send

FSK CallerID

Sets when to send the CallerID, before rings or after the 1

Ring. The default value

after 1

Ring

Send Polarity

Reversal Signal

Once this feature is enabled, the gateway will send the polarity reversal signal to a

corresponding FXS channel when it detects the called party pick-up behavior. By

default, this feature is

disabled

Handling of Call from

Internal Station

Sets the handling mode for the calls from station to station, two options available:

Internal Handling and Platform Handling, with the default value of Platform

Handling.

Light Up Mode for

Voice Message

Sets the light up mode for the voice message of the phone, There are two options:

Not Light Up

and

Light Up by FSK

, with the default value of

Not Light Up

Work Mode

Sets the work mode for the echo canceller. There are two options: Near-end

cancellation and Both near-end and far-end cancellation, with the default value of

Near-end cancellation

Non-linear

Processing

Sets whether to enable the mode of non-linear processing. By default, this feature is

enabled

Fixed Window Size

Sets the size of the window for the fixed cancellation.

Moving Window Size

Sets the size of the window for the moving cancellation.

After configuration, click

Save

to save your settings into the gateway or click

Reset

to restore the

configurations. If a dialog box pops up after you save your settings asking you to restart the
system, do it immediately to apply the changes. Refer to

3.9.17 Restart

for detailed instructions.

Содержание SMG-C Series
















































































































Результаты поиска

Содержание SMG-C Series

Отзывы:

Synway SMG-C Series, Руководство пользователя, Страница: 38 / 111

Результаты поиска

Содержание SMG-C Series

Отзывы: