Page 7 of 17
End of Life
Wireless Hand Control, EG1A (WIRELESS-HC)
The hand control is a SINGLE USE only device. Product expiration date can be found on the device package label.
Receiver for Wireless Hand Control, EG1A (RECEIVER-HC)
The lifetime requirements of the receiver are event-related depending on the use and inspection of the device in
clinical practice. The lifetime of the device may be compromised following normal conditions of use such as, but not
limited to:
Damage, including but not limited to corrosion (e.g. rust, pitting), discoloration, scratches, flaking, cracks and
wear.
Excessive temperature during operation.
Improper function, including but not limited to inability to connect to console or failure to pair.
Missing, faded, or removed device markings.
Made obsolete or no longer in use.
Damage impeding the ability to inspect or use the device.
Service Lifetime
These devices do not require periodic service.
Warranty & Return Policies
Warranty and return policy are available upon request.
All Instrument System components returned should be properly cleaned as applicable prior to shipping to the
manufacturer.
Warning: Transmissible Spongiform Encephalopathies (TSE)
DePuy Synthes Power Tools will not authorize or accept the return of products that directly contact patients or are
contaminated with a patient’s body fluids who is suspected or confirmed with a Transmissible Spongiform
Encephalopathies/ Creutzfeldt-Jakob Disease (TSE/CJD) diagnosis. DePuy Synthes Power Tools recommends
that all ANSPACH High Speed System products used on a patient confirmed with a TSE/CJD diagnosis be
incinerated. ANSPACH High Speed System Dissection Tools used on a patient suspected of TSE/CJD diagnosis
must be incinerated.
Contact your Sales Representative for replacement of product incinerated under this policy or for temporary
equipment while original equipment is quarantined. Contact the DePuy Synthes Power Tools Customer Service
Department regarding TSE/CJD contamination for additional information.
Receiver for Wireless Hand Control, EG1A Displays
Display
Result
Description
Not Paired
Press the pairing button on the
receiver and wait until light flashes
blue to initiate pairing.
