机床产品
/Machine Tool Products
–
60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction
–
b.
c.
d.
e.
•
•
•
•
•
•
•
•
•
•
•
a.
b.
c.
d.
e.
f.
g.
•
Move cursor to the G54 X axis coordinate
Input 10.000
Press "Mach. Inc. Input"
The G54 X axis value will then become 15.000
Middle Function
Path
5 key, 8key
：
F3 Offset/Setting
→
F1 Workpiece Coord.
→
F5 Middle Func.
10+8 key
：
F3 Offset/Setting
→
F1 Workpiece Coord.
→
F5 Middle Func.
Explanation
This function helps to calibrate the middle point of workpiece before machining.
The value calculated by middle function will be input to G54~G59 workpiece coordinates for
coordinate setups.
Middle function provides 2 modes, manual mode and auto mode.
Manual Middle Function
Explanation
Set middle function to mode 0
User controls the machine with MPG and moves the machine to the end point of workpiece in X, Y
axis direction respectively to record the machine location. The system will automatically
calculate the X, Y axis value of workpiece center point.
Operation method
Move the tool with MPG, reach Px1 point in the figure and press "Px1 Set". The current location
will be set as the machine coordinate of Px1 and be recorded on the screen. The machine
coordinate of workpiece middle point in X axis direction will be calculated using Px1 and Px2, the
result will be shown in the Pxm column and Aux. Coord. X column.
Move the tool with MPG, reach Px2 point in the figure and press "Px2 Set". The current location
will be set as the machine coordinate of Px2 and be recorded on the screen. The machine
coordinate of workpiece middle point in X axis direction will be calculated using Px1 and Px2, the
result will be shown in the Pxm column and Aux. Coord. X column.
Move the tool with MPG, reach Py1 point in the figure and press "Py1 Set". The current location
will be set as the machine coordinate of Py1 and be recorded on the screen. The machine
coordinate of workpiece middle point in Y axis direction will be calculated using Py1 and Py2, the
result will be shown in the Pym column and Aux. Coord. Y column.
Move the tool with MPG, reach Py2 point in the figure and press "Py2 Set". The current location
will be set as the machine coordinate of Py2 and be recorded on the screen. The machine
coordinate of workpiece middle point in Y axis direction will be calculated using Py1 and Py2, the
result will be shown in the Pym column and Aux. Coord. Y column.
The value of Pxm and Pym is the coordinate of workpiece middle point.
For controller software versions before 10.116.24x(included), first switch to workpiece coordinate
setting screen, then move cursor to the required workpiece coordinate system and press F3 "Aux.
Coord. Teach", the system will input the Aux. Coord. of the cursor located axis to the column.
For controller software versions above 10.116.34(included), first move cursor to "Workpiece
Coord. No. P" on middle function screen, then input the required workpiece coordinate number
and press F5 "Aux. Coord. Auto Setting", the system will input the Aux. Coord. in X, Y axis direction
to the corresponding workpiece coordinate.
Auto Middle Function
Explanation
Содержание 60CA
Страница 1: ...60CA 60CB Simple Type Wood Cutting Machine Operation Manual 2022 02 23 2019 05 31...
Страница 2: ...Machine Tool Products 60CA 60CB Simple Type Wood Cutting Machine Operation Manual Manual...
Страница 133: ...Machine Tool Products 60CA 60CB Simple Type Wood Cutting Machine Operation Manual How to Operate 60 Series Controller...
Страница 139: ...Machine Tool Products 60CA 60CB Simple Type Wood Cutting Machine Operation Manual Appendix 6 Appendix 6 1 Contact Window...
