SYNTEK 60CA, Руководство по эксплуатации

Страница: 115 / 139

机床产品
/Machine Tool Products
–
60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
How to Operate 60 Series Controller
–
•
•
•
•
•
•
•
•
i.
ii.
•
•
i.
ii.
iii.
•
•
•
•
•
•
•
•
•
•
a.
•
•
b.
c.
Maximum lifetime of tool.
Lifetime prediction
When lifetime of tool is greater than lifetime prediction, alarm will be show up.
Current Status of Tool
(0)Without management: Set values are not effective.
(1) Without use: Lifetime of tool is zero.
(2) Usable:0< Tool Life Time <lifetime prediction
(3) End prediction: Lifetime prediction < Tool Lifetime < Maximum Lifetime
(4) End of Life: Maximum Lifetime < Tool Lifetime
(5)ware of tool
5.4 Program Preparation and Execute Machining
5.4.1 Select Machining Program
Condition:
Except single block mode
Specify current programming file as machining program
Operation:
Switch to edit page
Press F1 "Execute", and the program will be designated as the machining program
Specify machining program in file manager.
Operation:
Switch to the "File Management" page
Move the cursor to the expected program and press Enter
Press F1 "Execute", and the program will be designated as the machining program
Confirmation:
There are two ways to confirm whether machining program is specified successfully.
The screen displays the correct machining program name
The content of machining program is displayed when pressing F4-Monitor
5.4.2 Simu. Setting
SYNTEC's controller provides simulation program, after editing machining program, users can easily simulate
the path of machining process. This feature also includes checking function that help user quickly find out the
syntax error in machining program or unreasonable actions. We suggest user make good use of this feature after
programming.
Condition
Except single block mode
Operation
In the "File Management" page, select the program you want to edit after programming, and
press F7 "Simulation"
Screen will switch to the page "graphic simulation" and scan the content of the program
Description
In simulation screen
The solid line represents the cutting path
The dashed line represents the moving path
During the checking, if there is any syntax error of content, they will be displayed on the screen
with corresponding line number
F1( S
tep ): Check NC files once a line