10
3-
Slide the seat interface tubular adaptors directly into the seat-frame interface sockets.
Start by inserting just one side of the seat interface tubular adaptors into the OPEN
interface socket (without locking pins).
4-
Push the second side down so that the seat locks automatically (you will hear the locking
sound).
5-
Finally check if the seat is properly locked by slightly lifting the seat unit. Seat must not
separate from the interface frame.
Fitting the Seat in the Rear-facing Position:
1-
Make sure that the stroller frame is unfold and locked into the unfolded position. (see
previous section).
2-
Hold the seat in a way that it faces towards the back of the stroller.
3-
Slide the seat interface tubular adaptors directly into the seat-frame interface sockets.
Start by inserting just one side of the seat interface tubular adaptors into the OPEN
interface socket (without locking pins).
4-
Push the second side down so that the seat locks automatically (you will hear the locking
sound).
5-
Finally check if the seat is properly locked by slightly lifting the seat unit. Seat must not
separate from the interface frame.
Lateral Protector Installation
1-
Attach the two (2) plastic clips on the protector to the vertical tubing on the side of the
backrest.
2-
Repeat for the other protector.
Содержание TOM5 STREETER
Страница 1: ... USER GUIDE TOM5 STREETER ...