Synetik ErgoCare TOM5 STREETER, Руководство пользователя

Страница: 10 / 33

9
Items List:
•
Stroller-style wheelchair detachable
and reversible seat unit
•
Stroller-style wheelchair frame
•
Grab bracket covers
•
Padded frame covers
•
Lateral protectors
•
Accessories
•
5-point Belt
Unboxing the Tom5 Streeter
1- Remove the contents from the boxes and place on a flat surface.
2- Make sure that the material corresponds with what you ordered and that no damage was caused
during transportation.
3- Follow the instructions in the following section (Assembling the Tom5 Streeter).
Assembling the Tom5 Streeter
The instructions in the User Guide will direct you through the assembly process of the stroller-style
wheelchair. However, it is recommended that the initial adjustment for the user be done in the
presence of a Synetik ErgoCare representative.
NOTE! The numbers in parenthesis refer to the Schema presented on Page 6.
Unfolding the Stroller-style Wheelchair Frame (without the seat)
1- Place folded stroller frame on its wheels.
2- Unsnap and release the transport safety-catch (29) on frame.
3- To unfold the stroller frame, stay between the rear wheels and hold the handle (1) tightly.
Move the handle up and back until the handle-folding release (3) is fully locked into its
end position.
4- To check the locking position, move the handle upward to ensure that both mechanisms
are fully locked (the stroller frame must not start folding inward).
Fitting the Seat in the Forward-facing Position
1- Make sure that the stroller frame is unfold and locked into the unfolded position. (see
previous section).
2- Hold the seat in a way that it faces towards the front of the stroller.