Synetik ErgoCare TOM5 STREETER, Руководство пользователя

Страница: 16 / 33

15
1- To change the handle height position, press the black plastic buttons on the handle hinges
on both sides simultaneously (2).
2- Set the handle to desired position, release knobs.
3- Handle will lock into new position automatically; you will hear the locking sound.
Unfolding the Stroller (with the Seat)
1- Place folded stroller on its wheels.
2- Unsnap and release the transport safety-catch (29) on frame.
3- To unfold the stroller frame, stay between the rear wheels and hold the handle (1) tightly.
4- Move the handle up and back until the handle-folding release (3) is fully locked into its
end position.
5- To check the locking position, move the handle upward to ensure that both mechanisms
are fully locked (the stroller frame must not start folding inward).
6- Pull the seat tilt-in-space adjustment lever (pic.5) and move the seat to the required
position.
7- Pull the padded frame covers (27) down over the locking mechanism and zip both covers
up.
8- Release the backrest recline-adjustment lever (7) and set the position of the backrest.
9- Tighten the lever properly when the desired backrest angle is reached.
10- Release the footrest angle adjustment lever (20), set footrest (13) to the desired position
and retighten lever.
Folding the Stroller (with seat attached)
1-
Apply the parking brake.
2-
Release the footrest angle-adjustment lever.
3-
Set the position of the footrest just bit less than horizontally (pic.4).
4-
Release the footrest Velcro security band and fold up the footrest (pic.4).
5-
Release the backrest recline adjustment lever and push backrest as far as possible forward,
towards the seat base. (pic.6).
6-
Re-tighten the lever.
7-
Unzip the padded frame covers partially and pull them over the locking mechanism.
8-
Pull up the seat tilt-in-space adjustment lever (pic.5) and set the position of the seat to tilt
forward to maximum (pic.6).