![Synapse SE72 Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/synapse/se72/se72_user-manual_1420498005.webp)
SYN-INT-E01
5
4. Align and secure the mounting base to the connection box 4.
using the two screws supplied.
5. Route wires coming from the wall through the hole of the
mounting base and make the required connections using the
“Four-wire installation” figure, and using the supplied solder-
less connectors. A pair of wires (black) must be connected
to the power source (120-208-240 VAC) and another pair
(yellow) must be connected to the heating cable (refer to
the drawings displayed on the back of the thermostat). For
connections with aluminum wires, you must use CO/ALR
connectors. Please note that thermostat wires do not have
polarity, meaning that any wire can be connected to the other.
Then, install the floor temperature sensor.
Four-wire installation