SYN-INT-E01
13
Copy of the Programming
You can apply the programming of one day of the week to oth
-
er days by copying the programming day by day or in block.
To copy the programming day by day, you must:
1. Press down the source day button (day to be copied).
2. Hold down this button and press down the destination
days one by one. The screen displays the selected days. If
an error occurs when you are choosing a day, press down the
erroneous day again to cancel the selection.
3. After all selections are completed, release the source day
button. The selected days have the same programming as
the source day.
To copy the programming in block, you must:
1. Press down the source day button, hold it and press down
the last day of the block you want to copy.
2. Hold down these two buttons for 3 seconds. After this
time, the days of the block are displayed indicating that the
copy in block is activated.
3. Release the buttons. The days of the block are not
displayed anymore and the current day is displayed.
N.B.
The block order is always increasing. For example, if the
source day is Thursday and the destination day is Monday, the
copy will only include Friday, Saturday, Sunday and Monday.
