SYN-INT-E01
10
Manual Mode (Man)
From the Manual mode, you can manually adjust the thermostat
set point by pressing down the + or – buttons to increase the
value, or to decrease it. Please note that if the backlight is off,
the set point will not change when you press down these but-
tons for the first time instead, the backlight will be activated. To
quickly scroll through the set point values, press and hold down
the button. From both modes (Ambient/Floor), the set points
can range between 1 and 35°C and can only be adjusted by in-
crements of 1°C (from 34 to 95°F; by increments of 1°F from the
Fahrenheit mode). The thermostat will turn off if the set point is
lowered below 1°C (34°F), and the set point value displayed will
be OF. The standard factory set point adjustment is 21°C (Floor
mode). From this mode, the screen displays the Ambient/Floor
mode temperature, the Ambient/Floor mode set point, the hour
and the day of the week.
This mode is initially activated when the power is turned on for
the first time. You must adjust the hour (as described in the sec
-
tion “Adjustment of the hour and the day of the week”) before
switching to other modes by pressing down the Mode or Pre
Prog button.
Automatic Mode (Auto)
To switch from the Manual mode to the Automatic mode, and
conversely, press down the Mode button. The Man or Auto icon
is displayed at the bottom of the screen as applicable.
From the Automatic mode, the thermostat adjusts the set points
according to the programmed periods. If no data is entered, the
thermostat acts as in Manual mode and the standard factory
set point adjustment is 21°C (Floor mode). It is always possible
to manually adjust the set point using the + or – button. The se
-
lected set point will be effective until one period is programmed,
which represents an hour and a day of the week. Note that, if
the set point is lowered to OF, the programming will not be ef
-
fective. It is possible to program 4 periods a day, meaning that
the set point can change automatically up to 4 times a day. The
period order is not important.
