Symmetricom ND-CLK Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 55

Symmetricom ND-CLK Скачать руководство пользователя страница 45

ND-CLK User Manual- Rev 1.0.1 - Sep-08

42

Symmetricom

®

, Inc

Limited Warranty

Each new product manufactured by Symmetricom is warranted for defects in material or

workmanship for a period of one year from date of shipment (“Limited Warranty”).

Defects in material or workmanship found within that period will be replaced or repaired,

at Symmetricom's option, without charge for material or labor, provided the customer

returns the equipment, freight prepaid, to the Symmetricom factory under this limited

warranty. Symmetricom will return the repaired equipment, freight prepaid, to the

customer's facility.

Limitation of Liability

By purchasing any product from Symmetricom, the Buyer consents to and agrees that the

Buyer's sole and exclusive remedy for any damages or losses incurred by the Buyer, as a

result of Symmetricom's breach of its one-year Limited Warranty for defects in materials

and workmanship or otherwise in connection with any claim respecting the product, shall

be limited to the repair or replacement of the product or a refund of the sales price of the

product. In no event shall the Buyer be entitled to recover consequential damages or any

other damages of any kind or description whatsoever.

Proprietary Notice

THIS DOCUMENT, WHETHER PATENTABLE OR NON-PATENTABLE SUBJECT

MATTER, EMBODIES PROPRIETARY AND CONFIDENTIAL INFORMATION. IT

MAY NOT BE REPRODUCED, USED OR DISCLOSED TO OTHERS FOR ANY

PURPOSE EXCEPT THAT FOR WHICH IT IS PURCHASED OR LOANED.

«
...
43
44
45
46
47
...
»

Содержание ND-CLK
























































Отзывы:

Нет отзывов