Symmetricom ND-CLK Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 55

Symmetricom ND-CLK Скачать руководство пользователя страница 21

ND-CLK User Manual- Rev 1.0.1 - Sep-08

18

Symmetricom

®

, Inc

Network Time Protocol [NTP] Parameters

–

Allows for setting the NTP mode and parameters of the SNTP

client in the network clock. These settings are located in the upper left hand section of the device settings

window

The Primary Source information must be configured in order to acquire time from an NTP source.

Enter either the IP address or Internet address (URL) for the NTP source. If available, enter a

Secondary Source for backup.

The primary and secondary server information can automatically be configured by the DHCP server

when selecting the “Use NTP server(s) address provided by DHCP server” provided your DHCP

server is configured to do so. Consult your IT /Network Administrator to utilize this option.

The default, well-known port for NTP service is 123. This can be changed as desired (using the Telnet

application).

[Note: some NTP/SNTP servers will expect NTP clients to operate on port 123 and cannot be configured to

utilize alternate ports.]

Query NTP server for time (Unicast Mode for NTP) - By default, the NTP clock will operate only

in Unicast /Query mode using server port 123.

This mode is selected exclusively when neither the listen for NTP broadcast nor the

listen for NTP multicast modes are selected.

Listen for NTP broadcasts

–.

The network clock can configured to listen to NTP broadcasts by

selecting the “Listen for NTP via broadcast address [255,255,255,255]” checkbox.

The Broadcast/Multicast timeout period (in minutes) is adjustable when this mode is selected.

«
...
19
20
21
22
23
...
»

Содержание ND-CLK
























































Отзывы:

Нет отзывов