Symmetricom ND-CLK Скачать руководство пользователя страница 43

Страница: 43 / 55

ND-CLK User Manual- Rev 1.0.1 - Sep-08

Symmetricom

, Inc

SPECIFICATIONS
Communications – Protocol

•

DHCP (enabled by default) configuration, or via Static IP mode entry.

Network configuration: IP address, Netmask,

Gateway (Router - DHCP Option 03),

Primary and Secondary DNS (Domain Name Server - DHCP option 06)

Primary and Secondary NTP Servers (Network Time Protocol Server - DHCP Option 042 )

Time Zone Offset (Time Offset – DHCP Option 02) –

Note: not enabled by default

•

IPV4

•

SNTP /NTP version 4 – UDP, port 123 (default)

Unicast [Query] (default), and broadcast, multicast modes.

•

Telnet – TCP, port 23 (default)

•

Control/WinDiscovery protocol – UDP, port 6163

Communications – I/O

Ethernet (10mbps) ................................................RJ45, 10baseT

Length of communication cable (Cat5/5e) ........100 meters maximum

Power Requirements AC Model

AC Input Voltage ................................................100-240 VAC +/-10% (90-264VAC), 47-63 Hz

AC Input Connector .............................................Universal IEC input connector

AC power consumption........................................<10 W

Protection…............................................Built in fuse, output power limiting, over voltage, and

short circuit protection.

Caution: there are no user serviceable parts inside the ND-CLK.

Please contact the factory if you require servicing or repair.

Power Requirements POE Model

Power Over Ethernet Input Voltage ....................+48VDC per IEEE802.3af

Mode A.............................................................+48VDC on spare pins 4&5, return on pins 7&8

Mode B .............................................................+48VDC & data on pins 1&2, return on pins 3&6

POE input connector ............................................RJ45

POE power consumption......................................<12.95 W, class 0

Protection…. .........................................Provided by the IEEE802.3af standard.

Length of network cable (Cat5/6).........................100 meters maximum, final run with POE

Internal Battery Circuit

MODEL

Maintenance Free Rechargeable Battery

ND-CLK

3V,17 mAh, Coin Cell

Rechargeable Manganese Lithium

Panasonic ML1220/V1A

Rechargeable battery and recharging circuit requires no maintenance and retains all configuration settings

for two weeks (minimum holdover) without applied external power. Note: clock hand alignment settings

are maintained in non-volatile flash and are not affected by either loss of power or internal battery voltage.

Physical

Size: 12.5” (31.8cm) Round Black Metal Case with 12” Face, 4.25” (10.8cm) high, polycarbonate lens.

Weight : 7.6 lbs. (3.45kg)

Operating/Storage Temperature & Humidity

Operating Temperature ............................................0 to +50°C

Relative Humidity ....................................................Up to 90% (non condensing @ 25°C)

Storage Temperature ...............................................-40 to 70°C

Содержание ND-CLK
























































Результаты поиска

Содержание ND-CLK

Отзывы:

Symmetricom ND-CLK, Руководство пользователя, Страница: 43 / 55

Результаты поиска

Содержание ND-CLK

Отзывы: