Symmetricom ND-CLK Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 55

Symmetricom ND-CLK Скачать руководство пользователя страница 19

ND-CLK User Manual- Rev 1.0.1 - Sep-08

16

Symmetricom

®

, Inc

[Note: The static IP address you enter must not be in use by another device on the

network , this includes IP address ranges reserved for use by the DHCP server. If a

static IP address is used which creates a duplicate IP address condition, the network

clock will be re-assigned a fallback IP address of 169.254.xxx.xxx ]

169.254.xxx.xxx IP (fallback) address

DHCP is enabled by default. If DHCP is enabled and no DHCP server can be found the NTD clock will

default to a 169.254.xxx.xxx address.

In addition, if an IP address conflict is determined when the Ethernet interface is initialized (either DHCP

or static) the NTD clock will default to a 169.254.xxx.xxx address.

This 169.254.xxx.xxx is a link local address range (i.e. not allowed on the internet) and is used by

Microsoft when their DHCP clients cannot find a DHCP server.

To determine the cause of why the clock fell back to a 169.254.xxx.xxx address the user should display the

status of the clock.

Please see the “Status” section for details as to how to determine the cause of the fallback IP address.

[Note: Devices which have been assigned a fallback IP address of 169.254.xxx.xxx will

be displayed in the main WinDiscovery window with

RED

text, indicating a problem with

the configuration.]

Device Name

Each clock is programmed at the factory with a factory device name. This name includes

the model name and a “MAC address” extension.

[Hint: You can change the device name to one convenient for your site – preferably one

that helps you to later identify the exact physical location of the device. ]

Administrative Hub

[Note: the Administrative Hub configuration item is reserved for future use.]

«
...
17
18
19
20
21
...
»

Содержание ND-CLK
























































Отзывы:

Нет отзывов