Symmetricom ND-CLK Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 55

Symmetricom ND-CLK Скачать руководство пользователя страница 42

ND-CLK User Manual- Rev 1.0.1 - Sep-08

39

Symmetricom

®

, Inc

1. You have entered and “remembered” an incorrect password in the password

windows. This is now causing multiple error indication windows titled “bad

password” to pop-up for each portion of the configuration message that is being

sent to the clock. You must clear the memorized password using one of the two

options below.

2. WinDiscovery only remembers the password for the current session, close the

WinDiscovery session and reopen. All passwords will be forgotten by the

WinDiscovery application.

3. As an alternative to closing the WinDiscovery session, Right click on the device

being administered in the main WinDiscovery window. The right click pop-up

menu now contains an entry for “Forget Memorized Password”. Select this

option.

4. If using the global password feature, the global password does not match the

existing password of the device you are trying to manage. Either change the

device password to match that of the global password, or change the global

password to match that of the device(s) you are attempting to manage.

If these troubleshooting tips do not solve your problem, contact customer service at:

[email protected]

or call: ….. 888-367-7966 in the USA

….. 408-428-7907 worldwide

«
...
40
41
42
43
44
...
»

Содержание ND-CLK
























































Отзывы:

Нет отзывов