Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Hardware
Copyright © Symeo 2012
Page 27 of 132
Ethernet: Plugged connection
Antennas
Connection of up to 4 independent antennas
Compliance
CE mark
4.2.3
Station BSB000313, BSB000319
1
9
1
26
0
160
2
3
4
5
Figure 9- interfaces of LPR station on vehicle as a single receiver
Description of Interfaces
1
Pressure equalization membrane.
The membrane prevents forming of condensation water inside the Compact Station.
The pressure equalization membrane must not be changed or covered!
2
Network (optional).
The standard industrial Ethernet port of the station is designed as a Harting type
push pull connector.
3, 4
Antenna connections.
The antennas are connected to the Compact Station via a specially converted low-
loss HF cable with N-plug.
3: Antenna port no. 1,
4: Antenna port no. 2.
5
Power supply with integrated communication ports.
Power is supplied via a Lumberg Type 0233 08 push pull connector. There is no
power switch because of the intended area of application. A 3 Ampere (slow blow)
fuse is mounted inside the Compact Station.
