Symantec PCANYWHERE - V12.1, Руководство пользователя

Страница: 71 / 321

Using the Connection Wizard to configure a host connection
The Connection Wizard guides you through the process of configuring your
computer (the host computer) to allow another computer (the remote computer)
to connect to it. After the Connection Wizard finishes, you can launch the host
to wait for connections.
Symantec pcAnywhere stores these connection settings in a host connection file.
It places the host connection item in the Hosts window. You can use the host
connection item to begin a host session or to modify the connection settings.
Symantec pcAnywhere offers some advanced configuration options that are not
available in the wizard.
See “Configuring a host using advanced properties” on page 73.
To use the Connection Wizard to configure a host connection
1
In Advanced View, on the left navigation bar, under pcAnywhere Manager,
click pcAnywhere Tools.
2
In the right pane, double-click Connection Wizard.
3
On the Introduction screen, click I want another computer to connect to my
computer, and then click Next.
4 Select one of the following:
■
I want to use cable modem/DSL/LAN/dial-up Internet ISP.
■
I want to use my telephone modem to connect directly to another telephone
modem.
The wizard automatically detects the connection devices that are available
on your computer. If your computer has multiple connection devices,
choose the device that you want to use for the connection that you are
configuring. For example, if the remote computer uses a phone modem,
you should select the phone modem as your connection device.
5
Click Next.
6
In the Connection Mode panel, select one of the following:
■
Wait for someone to call me
■
Call out to another computer
In the Remotes IP Address box, type the IP address or modem phone
number of the computer to which you want to connect.
7
Click Next.
71 Allowing others to control your computer
Ways to set up a host computer