Symantec PCANYWHERE - V12.1, Руководство пользователя

Страница: 100 / 321

Remote Control
■
■
Remote Management
■
File Transfer
Symantec pcAnywhere lets you switch modes during a session.
See “About the start modes for remote connections” on page 58.
5
If you want to connect through pcAnywhere Gateway or pcAnywhere Access
Server, check Connect through Gateway or Access Server.
If you select this option, click Details to set up the connection to the gateway
computer or access server.
See “Connecting through pcAnywhere Gateway or pcAnywhere Access Server”
on page 108.
6
On the Settings tab, type the IP address or computer name of the computer
to which you want to connect.
You can leave this information blank. When you start the session, pcAnywhere
will automatically search your subnet for available hosts. This process can
be time-consuming if your computer belongs to a large network.
7 Click OK.
Customizing the data port range for remote connections
Administrators can customize network settings to handle connections on both
sides of a firewall.
Symantec pcAnywhere automatically chooses a port number each time that you
make a remote connection. For security or performance reasons, an administrator
might want to limit the number of ports that are used for outbound connections.
Limiting connections to too small a range can cause connections to fail because
there might not be enough available ports.
Note: Some port numbers lower than 1024 are reserved for Web-based applications
and services, such as FTP and the Internet. Choosing a reserved port number
might interfere with these applications and possibly result in loss of service. This
procedure should be performed by an experienced administrator.
Controlling another computer remotely
Ways to set up a remote computer
100