Symantec PCANYWHERE - V12.1, Руководство пользователя

Страница: 208 / 321

denial of service by limiting the length of time that a user can stay connected and
by configuring the host to automatically disconnect after a specified length of
inactivity.
This option sets a time limit for only the users or group of users who are assigned
to the caller account. When you set a time limit for a session, you should ensure
that you allow remote users sufficient time to perform their tasks.
You can also set limits to prevent users from connecting at specific days and times.
See “Blocking connections by days or times” on page 208.
To set time limits for callers
1
In the Symantec pcAnywhere window, in Advanced View, on the left
navigation bar, click Hosts.
2 In the right pane, under Hosts, right-click the connection item that you want
to configure, and then click Properties.
3 In the Host Properties window, on the Callers tab, right-click the caller item
that you want to configure, and then click Properties.
4
In the Caller Properties window, on the Privileges tab, click Specify individual
caller rights.
5
Under Time limits, select any of the following:
Automatically disconnects the remote user after a specified
period of time
Limit time allowed per
session
Automatically disconnects the remote user if there has
been no keyboard or mouse input for a specified period of
time
Caller subject to
inactivity timeout
6
Select the number of minutes.
7
Click OK.
Blocking connections by days or times
You can block a user or group of users from connecting to a host computer on
certain days or times. This lets you control the amount of time that a host computer
is available for connections. For example, you can block remote users from
connecting to your computer at a time of day when you will be running a critical
task.
Securing your computer and sessions
About access rights
208