Symantec GHOST IMAGING FOUNDATION 7.1 Скачать руководство пользователя страница 76

Страница: 76 / 189

This produces a boot-sector file C:\bootos2.dat.

Removing an entry from boot.ini

The syntax to remove an entry from boot.ini is as follows:

gdisk32 /bootini /remove /entry:number [/inifile:filename] [/r]

Table 5-13

lists the remove switches.

Table 5-13

/remove switches

Explanation

Switch

Removes the entry from boot.ini.

/remove

Removes the ID of the entry from boot.ini.

/entry:number

If the entry to be removed is the default boot option, then GDisk removes the
entry and sets the first entry in the remaining list as the default boot entry.

GDisk does not remove the entry if it is the only entry in boot.ini.

Setting the default boot option and timeout

Use the /default switch to set the default boot option and timeout.

The syntax for this command is as follows:

gdisk32 /bootini /default [/entry:number] [/timeout:sec]

[/inifile:filename] [/r]

Table 5-14

lists the default boot option and timeout switches.

Table 5-14

Default boot option and timeout switches

Explanation

Switch

Sets the default boot option and timeout.

/default

Sets the ID of the entry as the default boot option.

/entry:number

Sets the number of seconds before the default boot option is selected.

/timeout:sec

Support for large hard-disks

GDisk supports all operations on disks up to 2 TB, and can also wipe disks larger
than 2 TB.

Managing partitions using GDisk

Support for large hard-disks

Содержание GHOST IMAGING FOUNDATION 7.1






























































































































































































Результаты поиска

Содержание GHOST IMAGING FOUNDATION 7.1

Отзывы:

Похожие инструкции для GHOST IMAGING FOUNDATION 7.1

Бренды по названию

Популярные бренды

Symantec GHOST IMAGING FOUNDATION 7.1, Руководство пользователя

Результаты поиска

Содержание GHOST IMAGING FOUNDATION 7.1

Отзывы:

Похожие инструкции для GHOST IMAGING FOUNDATION 7.1

Бренды по названию

Популярные бренды