Symantec GHOST IMAGING FOUNDATION 7.1, Руководство пользователя, Страница: 18 / 189

To establish a peer-to-peer connection with Ghost.exe
1 Do one of the following:
■
On the master computer, insert the first Ghost boot disk into the floppy
disk drive, and then restart the computer.
Repeat this step on the slave computer.
■
Restart the master computer and the slave computer by using the Ghost
boot package.
2
If you are using a floppy disk set, then, when prompted, insert the second
Ghost boot disk into the floppy disk drives of the master computer and the
slave computer.
Ghost.exe starts automatically.
3 On the slave computer, on the main menu, do one of the following:
Click Peer to peer > USB > Slave to start the computer
as the slave computer. USB connection
Click Peer to peer > LPT > Slave to start the computer
as the slave computer. LPT connection
Click Peer to peer > TCP/IP > Slave to start the
computer as the slave computer.
Make note of the IP address that is displayed in the
Slave Connect dialog box.
TCP/IP connection
4
On the master computer, on the main menu, do one of the following:
Click Peer to peer > USB > Master to start the computer
as the master computer. USB connection
Click Peer to peer > LPT > Master to start the computer
as the master computer. LPT connection
Click Peer to peer > TCP/IP > Master to start the
computer as the master computer.
Type the IP address that is displayed on the slave
computer.
TCP/IP connection
Using Symantec Ghost as a stand-alone program
Establishing a peer-to-peer connection with Ghost.exe
18