Symantec GHOST IMAGING FOUNDATION 7.1, Руководство пользователя, Страница: 49 / 189

4 In the File name box, type a name and a location for the first new file.
If you are splitting a file, all of the new files that are created are saved in the
same location. You should use a different name than the original image file
to avoid confusion.
5 Click Save.
6 If you are splitting the file, click OK each time that you are prompted to create
a new span segment.
Using Ghost Explorer from the command line
You can start Ghost Explorer from a command prompt by typing its path and file
name.
To start Ghost Explorer from a command prompt
1 On the Windows taskbar, click Start > Programs > Accessories > Command
Prompt.
2 Type:
c:\Program Files\Symantec\Ghost\Ghostexp
This is the default path to Ghost Explorer.
3
Press Enter.
Ghost Explorer has a batch mode in which it carries out a single command and
then exits. In this version, batch mode supports the saving of the contents to a
text file only.
Table 3-1 specifies the switches to use the batch mode.
Table 3-1
Batch mode switches
Description Switch
Saves the list of directories in the dump file to a file with
the same name as the image file but with an extension of
.txt -t
Saves a list of directories and files to filename -tf=filename
Saves a verbose listing of directories and files -tv
Saves a verbose list of directories and files to the file
specified -tv=filename
See “Listing the contents of an image file” on page 47.
49 Modifying image file contents with Ghost Explorer
Using Ghost Explorer from the command line