Symantec BRIGHTMAIL - SYM ANTISPAM AND, Руководство по установке

Страница: 96 / 160

Plug-Ins and Foldering
90 Symantec Brightmail AntiSpam™
Plug-Ins and Foldering
4
You can email your users a link to the
setup.exe
file in this directory, or use remote
distribution software to install it on your users’ computers. You can silently install by
running
setup.exe
with the following switches:
/s /v"/qn"
NOTE:
If you run
setup.exe
with the command
/s /v"/qn"
, the silent install option
ignores changes made to
setup.ini
. To preserve your changes, add
/qn
to
the end of the
CmdLine
attribute in
setup.ini
, and then run the silent install
using:
/s.
NOTE:
Instruct users to close Outlook before running the installer by clicking File,
and then clicking Exit. If they close Outlook in any other way, Outlook may
continue to run in memory and return an error.
To configure system-wide settings for the Symantec Plug-in for Outlook (optional):
1
Open the
setup.ini
file for editing. This file contains the initial settings for
launching the Symantec Plug-in for Outlook installation package. All the settings you
need to use can be set on the
CmdLine
attribute in the [Startup] section at the
beginning of the
setup.ini
file. The settings will be added as values for the following
Windows Registry key:
HKLM\Software\Brightmail\OutlookPlugin
2
You can also change the settings in Table 9, “Symantec Plug-in for Outlook Setup
Variables,” on page 90.
Example:
CmdLine=SPAM_FOLDER="Junk"
ADMIN_FALSE_ADDRESS="admin-false@my.company.com"
Table 9. Symantec Plug-in for Outlook Setup Variables
Variable Name Description
ADMIN_FALSE_ADDRESS The email address of the administrator to copy with
false positive submissions. The default for this is an
empty string. If this value is empty, then the
message will not be sent to the administrator.
ADMIN_JUNK_ADDRESS The email address of the administrator to copy with
missed spam submissions. The default for this is an
empty string. If this value is empty, then the
message will not be sent to the administrator.
ALLOW_CONTACTS If set to 1 (the default) or any non-zero value, treat
all entries of the Outlook Contacts folder as
members of the Allowed Senders List. If set to
0 , do
not treat any members of the Outlook Contacts
folder as members of the Allowed Senders List.
AUTO_ADD_BLOCKED When submitting a spam message to the BLOC, add
the sender of the message to the Blocked Senders
List. The default is
1 .