Symantec BRIGHTMAIL - SYM ANTISPAM AND, Руководство по установке

Страница: 25 / 160

Installing Brightmail Scanner for Sendmail
Installation Guide 19
Installing Brightmail Scanner for Sendmail
Table 2 describes the ways to invoke the Installer when installing Brightmail Scanner.
The prompts for the command line and GUI installation are the same. Only the command
line installation is presented in this guide. During installation, you can return to the
previous question (go back) or quit at any time.
The Installer creates the following default mail-handling characteristics:
•
Symantec Brightmail AntiSpam filters email addressed to all domains
•
All spam messages will have their Subject line modified, such that it begins with
[Spam]
•
All viruses detected in messages will be cleaned and the cleaned messages will be
delivered to the inbox
NOTE:
These settings, along with many others, can be adjusted using the Brightmail
Control Center. For more information about doing so please refer to the Symantec
Brightmail AntiSpam Administration Guide.
Find and Run the Install Script
An install script has been prepared for Linux and Solaris installations of Brightmail
Scanner. The install script ensures access to the correct libraries for Linux installations,
and provides the appropriate Java runtime environment for the Installer.
To locate the Install Script:
1
Make sure you have created the
mailwall
user and
bmi
group as described in “Create
Required Accounts and Directories,” on page 18 .
The Installer won’t run if you haven’t done this.
2
Do one of the following to navigate to the install script based on whether you are
installing from a CD-ROM or a downloaded file:
If you are installing from a CD-ROM:
a. Insert the CD containing Symantec Brightmail AntiSpam software into the CD-
ROM drive.
The CD will mount automatically to
/cdrom/bas_60 x
on Solaris systems.
Table 2. Installer Invocation Methods
Method Command Description
Command Line
install
The Installer prompts are presented in the terminal window
in which you started the Installer.
Graphical User
Interface (GUI)
install -i awt
The Installer prompts are presented using X Windows. To
use this GUI installation, X Windows must be installed and
configured correctly on your system.